In this tutorial, I will show you how to jailbreak your PS3 Slim Or FAT(which their minimal versions need to be 3.55) without having *dongle* or any E3 Flasher. Before telling that this operation can brick your PS3 system, please acknowledge that like if we were using E3 Flasher, you must know if your system flash memory is NOR or NAND, if your PS3 model are compatible from jailbreaking. If your system is not compatible with the E3 Flasher, then it's not compatible for this method so use at your own risk ! Credits to the method developers at the end of the thread.
Dongle : A USB device which has a primary function : Flashing the NOR / NAND Flash Memory. A dongle is NOT a USB Mass Storage Device.
#####NON - RESPONSIBILITY ADVICE#####
If, in the process, your PS3 won't boot anymore or just RLOD or RSOD, I should not be taken responsible or liable for the material damage to your system.
//Tutorial Starting
//Pre-requisites :
PS3 at OFW 4.82 ONLY !
NOR Flash Memory
Slim : CECH-2xxx
FAT : CECH-Hxx / Jxx / Kxx / Lxx / Mxx / Pxx / Qxx
NAND Flash Memory
FAT : CECH-Axx / Bxx / Cxx / Exx / Gxx
USB Storage with following files at directories
/flash_482.hex :
http://ps3xploit.com/writer/flash_482.hex
/PS3/UPDATE/PS3UPDAT.PUP : Go get your desired CFW 4.82 VERSION ONLY ! We are not downgrading, we are Jailbreaking NO FSM.
PC with Internet connection
Pre-requisites//
//Tutorial Part One : Cleaning Browser Cookies and cache memory
1- Open your Internet browser, press /\ and go to Tools to delete cookies then FULLY exit the browser.
2- Reopen browser Tools and clear Cache Memory, define your homepage as :
NOR:
PS3Xploit Team - PS3 NOR Flasher v2.*
NAND :
PS3Xploit Team - PS3 NAND Flasher v2.*
then reExit the browser.
3 - Make sure that flash_482.hex file is located at the root of your USB Storage, and is connected to the PS3 USB port closest of the Blu-Ray Reader.
4 - Open Internet Browser, not the Internet search, then press Initialize exploitation.
5 - Until it shows Exploit initialization SUCCESS .. , Press Patch NOR / NAND Flash Memory then wait until it says that flashing or patching operation completed, then wait 5 seconds for safety then reboot your system by pressing ON OFF PS3 button, then pressing it again once the PS3 is shut down.
Tutorial Part One Completed //
//Tutorial Part Two : Installing Custom Firmware
6 - Now that your flash memory is flashed, make sure that your 4.82 CFW is located at the following directory : /PS3/UPDATE/cfw-file.PUP, and rename the .PUP file to : PS3UPDAT.PUP so it should look like this : /PS3/UPDATE/PS3UPDAT.PUP using your PC
7 - Reconnect your USB Storage to the rightest USB Port then, in the XMB, go to Settings, System Update and use Update via Mass Storage. Don't check Power off when update completes, it's a waste of time The PS3 should detect your CFW but don't worry, your PS3 Flash Memory is patched, CFW will be successfully installed. There is a 1% risk of the CFW installation failing or having PS3 failure. I shall not be taken responsible for any damage caused to your system.
8 - If your CFW has been installed successfully to the PS3, then now you are free to install multiMAN and other homebrews to the PS3 Brewology website !
Tutorial Part Two Completed //
Tutorial Ended //
//Message
If you have any questions or comments to me, please comment this post and I will try to give you an answer as soon as possible.
Only Positive Comments will be answered. Anyone saying FAKE or HOAX or things like that should give a goal to their lives.
You can PM me at this time, if I say that I dont want to get any PM, please respect this option or else I will block you. My schedule is pretty busy but I have enough time to answer to PMs.
Goodbye !
Message ended//